ital TV Receiver
30
GDR11 Digital TV receiver
The programme information tells you:
• the programme name.
• the time the programme begins and ends; and
• if audio description or subtitles is available for that
programme. For more information on the symbols, see
page 17.
5 The yellow bar shows roughly how long the programme has
been running.
You can also see the signal strength and the signal quality on the
right-hand side of the screen.
How to choose a TV channel using your remote
control
There are several ways that you can choose a TV channel.
1 Press numbers 0 to 9 (You can choose up to three digits, for
example, 111 or 999. If the channel number you enter is not
available, your TV will not change channel.)
2 Press ‘P+’ or ‘P-‘.
3 Press ‘OK’. (This will show the channel list. You can use the
and buttons to choose another channel. For more
information, see page 31.)
4 Press ‘guide’. (This will show the channel guide. You can use
the and buttons to choose another channel. For more
information, see page 40.)
To Next Page
Loading...
