ital TV Receiver
26
GDR11 Digital TV receiver
Do not unplug the receiver from the mains until the standby light
(also the ‘on’ and ‘off’ light) stops flashing. Please see ‘Important
information’ below.
Important information about over-air downloads
Whenever you put the receiver on standby (this means you switch
the receiver off with the remote), the receiver will search for any
available over-air downloads (OADs). These are updates for the
receiver.
When the receiver is searching for or downloading an OAD, the
standby light (also the on and off light) indicator will flash. While it
is flashing, you must not unplug the receiver from the plug socket.
When an OAD has finished, a message will appear on your screen
telling you this. If your TV is switched off, you will see this message
next time you turn your TV on.
Standby ON/OFF indicator
To Next Page
Loading...
