ntpSrvRescaling ►
true(1) if the NTP server software is currently rescaling on the hardware. During
rescaling stage, the NTP server don’t reply to clients
false(0) if no rescaling in progress
ntpSrvRequiredAccuracy ►
A text that gives the required accuracy for this NTP software (related to the time
provided by the hardware)
unit: seconds
NTP server outcard: this accuracy is xed to 0.24414 ms (4096-1 s)
ntpSrvSecurityThreshold ►
A text that gives the maximum accepted difference between software clock and
hardware time before locking the server
unit: seconds
NTP server outcard: this value is initialised to 65535.0 seconds
NETWORK DIALOG INFORMATION & STATISTICS
ntpSrvNbNtpRequests ►
Total number of received NTP requests (in fact all the requests received on port
123). When this counter reaches 32767, it reloops to 0.
ntpSrvNbRjectedRequests ►
Number of rejected NTP requests. A request can be rejected if it bad-formed, en-
cryption is invalid or the NTP server is locked. When this counter reaches 32767, it
reloops to 0.
ntpSrvRequestsRate ►
Shows an approximation of the average number of requests per seconds.
ntpSrvNbTcpTimeRequests ►
Total number of received TCP Time requests. When this counter reaches 32767, it
reloops to 0.
ntpSrvNbUdpTimeRequests ►
Total number of received UDP Time requests. When this counter reaches 32767, it
reloops to 0.
5. SNMP INTERFACE
To Next Page
Loading...