System Setup
42 3A2098S
Configure Swirl Settings
NOTE: This applies only to systems with swirl
dispensers.
Set the individual Swirl settings for each installed Swirl.
Configure Gateway Settings
Gateway settings differ for each system. See
Automation Gateway Setup Screens, page 107, for
guidelines on configuring each type of Gateway
interface.
Setup Styles
The PCF system can store up to 256 styles. See Styles,
page 50, for more information about styles and
instructions on setting up styles. Style 0 is always the
purge style.
Configure Advanced Settings
Use the advanced settings to set or change the format
and display units, such as the language, date format,
and pressure units, for all PCF screens. See Setup
Mode, page 106, for advanced setting guidelines.
F
IG. 31
To Next Page
Loading...
