Models
3A2098S 9
Automation Gateway Assemblies
Each control center comes with one automation gateway assem-
bly. The automation gateway module is either a Discrete Gate-
way Module (DGM) or one of the Communications Gateway
Modules (CGM).To order a replacement, see the following table.
You will also need to order software upgrade token (16K743).
NOTE: Base and cable are not included.
Swirl Control DGM
The assemblies below each contain one swirl control DGM used
to control one Swirl Dispenser. To order a replacement, see the
following table. You will also need to order software upgrade
token (16K743).
PCF
Model
User
Interface
Description
Gateway
Part
Number
To
Order
Rotary
Switch
Position
Compatible
with
Advanced
CGM Map
PFxx0x Discrete
(DGM)
24B681 0 No
PFxx1x
+
PFxx6x
DeviceNet
™
(CGM)
15V759 Any Yes
PFxx2x
+
PFxx7x
EtherNet/IP
™
(CGM)
15V760 Any Yes
PFxx3x
PROFIBUS
™
(CGM)
15V761 Any No
PFxx4x
PROFINET
™
(CGM)
15V762 Any No
Assembly
Part Number
To Order
Rotary Switch
Position
PFxxx2,
PFxxx3,
16M350,
16M351
24B681
1, 2, 3, or 4;
see Swirl Control
DGM on page 22
Automation Gateway
(DGM or CGM)
Swirl Control DGM
To Next Page
Loading...
