Installation
16 3A8572B
Before First Use
Tighten Fasteners
Before using the equipment for the first time, check and
torque all fasteners. Follow Torque Fasteners,
page 39.
After the first day of operation, re-torque the fasteners.
Tighten Connections
Check and tighten all fluid connections before operating
the equipment. Replace worn or damaged parts as
needed.
Flush the Equipment
Before using the equipment for the first time, flush the
equipment. Follow Flush the Equipment, page 28.
The equipment was tested with water. If water could
contaminate the fluid being dispensed, flush the
equipment with a compatible solvent before first use.
NOTICE
To avoid pump damage, do not over-torque the
fasteners on the equipment.
NOTICE
Firmly tighten all connections to avoid leaks and
damage to equipment parts.
To Next Page
Loading...
