DP750/DP720 Administration Guide
Version 1.0.11.4
Secondary RADIUS
Authentication Port
Uses specified port for authentication with the secondary RADIUS authentication.
Default is 1812.
Secondary RADIUS
Account Port
Specifies port to be used for the secondary RADIUS account.
Default is 1813.
Secondary RADIUS
Sever Secret
Enters secret string to be used to authenticate the RADIUS connection to the
secondary server. It should match RADIUS configuration.
Specifies period of time before request is cancelled if no response. Default is 2.
Specifies amount of retry attempts if RADIUS communication failure. Default is 3.
Security Settings – Device Custom Certificate
Device Custom
Certificate
Configures the certificate used by device during provisioning and web access.
Device Custom
Private Key
Configures the private key used by device during provisioning and web access
Enable Device
Custom Certificate
When enables the device will use the custom certificate, otherwise it will use the
default certificates. Default is No.
Security Settings – Security
Validate Server
Certificates
Validate server certificates with our trusted list for TLS connections. If set to "No",
device will bypass certificate validation (not recommended)
Upload Trusted CA certificate to use for HTTPS/FTPS server.
Up to six CA Certificates can be uploaded.
Configures what certificates to use to authenticate with the server:
Default Certificates (built-in)
Custom Certificates
All Certificates
Defines URL or IP address of the NTP (Network Time Protocol) server.
Used by the base to synchronize the date and time. A list of public NTP servers
can be found at pool.ntp.org.
Contacts NTP server at specified period of time (in minutes) to obtain the date and
time. Default is 60 minutes.
To Next Page
Loading...
Need help?
General
