Turning the Handsets ON / OFF
To turn ON the handsets
Long press on Power key until the LCD screen lights up.
To turn OFF the handsets
Long press on Power key again when the handsets is idle until the display turns off.
Setup Wizard
Setup wizard shows at first access to DP722/DP730 or factory reset allowing users to configure handsets language and
date/time. Users can quit at any time by pressing “Skip” (left softkey).
Register DP730/DP722 Handsets to DP752 Base Station
1.
On DP752 Base station, press and hold the Radio/Page button for 4 seconds until the Radio icon starts
blinking to start Subscription process. Or Access web UI, and press Subscribe icon to Open Subscription.
2. On DP730/DP722, press “Subscribe” softkey if available on the main screen or access Menu 🡪 Registration 🡪
Registerwhile the DP752 Radio icon is blinking.
Note: “Subscribe” softkey appears only if DP730/DP722 is not registered to any DP752 base station.
3. Select BaseX (X=1-4) corresponding to the desired base station DP752, then press Subscribe.
4. The DP730/DP722 will search for nearby base stations and will display the RFPI code and Base station name of the
discovered DP752.
5. Press Subscribe to pair with the displayed DP752.
6. The DP730/DP722 will display Easy Pairing on the LCD and play an audible buzz when successful. Then it will return to
the home screen, displaying the Handsets name and number assigned by the registered base station.
Figure 11: Registration Process
Using DP730/DP722 with Multiple DP752 Base Stations
DP730/DP722 is able to be registered to up four different DP752 base stations.
To Next Page
Loading...
Need help?
General
