Registering DP730/DP722 to an additional DP752 base station
Considering DP730/DP722 is previously registered to an initial base station, please follow below steps to register a Handset to
an additional base station:
1. Press Menu (left softkey or the selection key) to bring up operation menu.
2. Use arrow keys to reach Registration and select Register.
3. Navigate to an unsubscribed base using arrow keys, and click on Subscribe.
4. Make sure that the subscription is opened on the new base station.
Figure 12: Multiple Base Stations Registration
Switching Between Different Base Stations
1. Press “Menu” (left softkey or the selection key) to bring up operation menu.
2. Use arrow keys to reach Registration.
3. Navigate to Select Base using arrow keys.
4. Select the desired base station and press Select.
Figure 13: Switching Between Base
Stations
Unregister the DP730/DP722
Using DP730/DP722 Handsets:
1. On DP730/DP722, press “Menu” (left softkey or the selection key) to bring up operation menu.
2. Press arrow keys to move the cursor to Registration, then press “Select” (left softkey).
3. Navigate to Deregister.
4. Select the Handsets to be unregistered and press “Deregister” (left softkey).
5. Enter the system PIN code (default: 0000).
6. Press “Done” (left softkey) to confirm or “Back” (right softkey) to cancel.
Using DP752 Base Station UI:
To Next Page
Loading...
Need help?
General
