Blind Transfer
1. Press the “Options” softkey during a call, and then select Blind Transfer, or press the softkey Transfer for DP730.
2. The initial call will be on hold, enter the number you want to transfer the call to.
3. Press Dial key . The call is connected to the number or the handsets you specified, and the LCD screen prompts Call
Transferred.
Attended Transfer
1. Press Left softkey “Options” during a call, and then select Attended Transfer.
2. Enter the number you want to transfer the call to, then press Dial key or press Call Softkey.
3. Once the second call is established, press left softkey Transfer to finish the Attended transfer.
Transfer between handsets
The Call Transfers can also be done between handsets without SIP account. The DP75x can transfer a call to another handset
even if it has no SIP account registered.
Speed Dial
Speed dial allows users to perform single-digit dialing to predefined numbers. This feature is particularly useful to speed up
dialing frequently used or hard to remember numbers. A maximum of 8 speed dial numbers is allowed.
For example, the digit key 2 is configured as a speed dial key and assigned the number 2000, the phone will dial out the
number 2000 directly when you long press digit key 2.
To assign the frequently used numbers as speed dial keys:
1. Press Menu to bring up operation menu.
2.
Access to Shortcut and then use Arrow keys to reach Speed Dial sub-menu.
Or;
Long press the representative number from 2 to 9 to set. (Note: The Speed dial number should not be already set on chosen
representative number, otherwise long press will initiate a call to configured speed dial number).
1. Choose the digit key (2-9) to set and press Options or OK button. Three options will be available:
Edit: To configure manually a contact as speed dial. Users need to enter “First Name”, “Last Name” and “Number”. (Note:
First Name + Number or Last Name + Number are accepted).
From Contacts: To set a contact from the phonebook directory to be as speed dial.
To Modify a Speed Dial:
Repeat above 2 steps.
At step 2, re-edit /re-assign a contact from the shared or private directory as speed dial on selected key.
To Delete a Speed Dial:
Repeat above 2 steps.
At step 2, select Clear Entry option and press OK or Select to confirm.
To Next Page
Loading...
