Ringtones
Setting the Ringer Volume on the Handsets
You can adjust the ringer volume for an incoming call to one of 6 levels (level 1 to 5 and off). Level 5 is the highest level. (The
DP722/DP730 Handsets are set to level 3 by default).
In order to configure the desired ringer volume, proceed as follows:
1. Press Menu to bring up operation menu.
2.
Use arrow keys to reach Settings .
3. Navigate to select Audio (For DP722) and Audio & Vibration (for DP730) 🡪 Volume.
4. Press the left and right arrow keys to change repeatedly and set the desired volume.
5. Press “Save” to confirm the volume, and a message prompt will be displayed to confirm that the new volume has been
successfully saved.
If you select OFF, the icon appears in the display and the handsets will not ring for incoming calls.
Figure 25: Ringer Volume
Setting Ringtones on the Handsets
You can change the ringtone for an incoming call. The device has 9 different ringer melodies for you to choose from (System
Ring, Ring 1-8). The default setting for the ring tone for a call is melody 1.
In order to configure the desired melody, proceed as follows:
1. Press Menu (left softkey or the selection key) to bring up operation menu.
2.
Use arrow keys to reach Settings .
3. Navigate to select Audio 🡪 Ringtones.
4. Press “Select” (left softkey) to confirm the ringtones selected and a message prompt will be displayed
to confirm that the new ringtones has been set successfully.
Figure 25: Calls Ringtones
To Next Page
Loading...
Need help?
General
