Reboot DP752 Base Station
1. Press Menu to bring up operation menu.
2.
Use arrow keys to reach Settings .
3. Navigate to select Settings 🡪 System Settings and choose Reboot Base.
4. Enter Base PIN code (by default the PIN code is: 0000).
5. The LCD screen will display a prompt message to confirm rebooting the base station, press “Yes” (left softkey) to confirm
or press “No” (right softkey) to cancel.
Figure 36: Rebooting the Base
Station
Reset DP722/DP730 Handsets
The users can reset the new settings made on the handsets after performing factory reset. To reset your handsets to the
default settings:
1. Press Menu to bring up operation menu.
2.
Use arrow keys to reach Settings .
3. Navigate to select Settings 🡪 System Settings and choose Factory Reset.
4. The LCD screen will display a prompt message to confirm restoring factory settings, press “Yes” (left softkey) to confirm
and then the handsets will reboot to apply the default settings or press “No” (right softkey) to cancel.