GRAPHTEC FC5100-130 - Background Settings for HP-GL

Background Settings: Background Settings for HP-GL
116
• Press the ENTER key to register your setting and to proceed to the next menu.
Press the NEXT key if you wish to bypass this setting with no changes.
If you used METHOD 1 to select BACKGROUND SETTINGS, press the MENU
key if you do not wish to make any changes. If you used METHOD 2 to select
BACKGROUND SETTINGS, turn off the plotter if you do not wish to make any
changes.
NOTE: This menu only appears when the 2 Pen option is installed.
Background Settings for HP-GL
LANGUAGE
SELECTION
You may select one of the following 12 languages for the operation menu: Dan-
ish, Dutch, English, French, German, Hungarian, Italian, Japanese, Norwegian,
Portuguese, Spanish and Swedish.
• Press the UP and DOWN ARROW keys to select the desired language.
• Press the ENTER key to register your setting and to proceed to the next menu.
Press the NEXT key if you wish to bypass this setting with no changes. The next
setting menu appears in the select language.
If you used METHOD 1 to select BACKGROUND SETTINGS, press the MENU
key if you do not wish to make any changes. If you used METHOD 2 to select
BACKGROUND SETTINGS, turn off the plotter if you do not wish to make any
changes.
Model No.
Response
(MODEL EMU-
LATED)
When the HP-GL command mode is selected, this function selects the plotter’s
response to an “OI” request sent from the computer. When 7550 is selected, the
plotter’s response is 7550. When 7586 is selected, the plotter’s response is 7586.
LANGUAGE SELECTION
[ ENGLISH ]
LANGUAGE SELECTION
[ ENGLISH ]
MODEL EMULATED
7550.
7586_.