Preparing to Cut: Initial Menu
36
Initial Menu
When the paper set lever is lowered, the INITIAL menu appears on the LCD.
Setting the Multilanguage Display
Your plotter’s display can be set to one of 12 different languages. To select the
language:
Method 1:
• Press the MENU key to select MENU MODE.
• Press the NEXT key until you get to BACKGROUND SETTING menu.
• Press the F2 key to select BACKGROUND SETTING menu and then the LAN-
GUAGE SELECTION menu appears.
• Press the UP and DOWN ARROW keys to scroll through the languages (Danish,
Dutch, English, French, German, Hungarian, Italian, Japanese, Norwegian, Por-
tuguese, Spanish and Swedish).
• Press the ENTER key to select the desired language, then next menu appears
with selected language.
• Press the MENU key to cancel menu mode.
Method 2:
• Turn the power on while pressing the DOWN ARROW key; the Menu selection
display then appears.
• Press the UP and DOWN ARROW keys to scroll through the languages (Danish,
Dutch, English, French, German, Hungarian, Italian, Japanese, Norwegian, Por-
tuguese, Spanish and Swedish).
• Press the ENTER key to select the desired language and then turn the power
off, then on again.
Menu Function Selection Sub Menus
INITIAL
MENU
F4 KEY AUTO PRE FEED
INITIAL FEED SPEED
INTERFACE
STEP SIZE
RS-232C
COMMAND
To Next Page
Loading...