Options: FC5100 Auto Registration Mark Sensor
171
T
HE REGISTRATION MARK READING AREA
In the default setting, the AUTO REG. MARK sensing function senses the regis-
tration mark by moving the media or sensor until the plotter locates the registration
mark. Normally there is no printed image within 6mm of the registration marks.
If you desire images between the registration marks, you may set the plotter to
move a set distance sensing for the registration mark. See Setting the Registra-
tion Mark Reading Area for more details. The following illustrates the reading
area the plotter requires for detecting registration marks:
Caution: Do not plot anything except registration marks within the registration mark
reading area.
Mark 2
32mm
15mm
20mm
15mm
Mark 3
Mark 1
Mark 3
Pattern 1
32mm
20mm
15mm
15mm
Media feed
direction
Mark 1
Mark 2
Pattern 2
(1.26")
(0.59")
(0.59")
(0.79")
(0.79")
(0.59")
(0.59")
(1.26")
Media feed
direction
Clear area,
Registration Mark only.
6mm
6mm
6mm
Pattern 1
6mm
6mm
6mm6mm
When you specify the position of the
mark, you can print the image in this are
between Registration marks.
Mark 2
6mm
Mark 3 Mark 1
Mark 2
Mark 1
6mm
Mark 3
6mm
6mm
6mm
Pattern 2
(0.24")
(0.24")
(0.24")
(0.24")(0.24")
(0.24")
(0.24")
(0.24")
(0.24")
(0.24")
(0.24")
(0.24")
To Next Page
Loading...