Advanced Functions and Settings: ORIGIN - Setting the Cutting Origin
66
Function 2:
Data Sorting – Groups the line segments.
Axis Alignment – Aligns pre-printed material for cutting.
Auto Pre Feed – Prevents slippage on large media jobs.
Tangent Emulation – Enables special blade control under specific circum-
stances.
Background Settings - For details see Background Settings.
Option 1:
Pen Up Speed – Reduces overall cutting time.
Offset Angle – Smooths curves on large characters.
Offset Force – Controls blade angle under special circumstances.
Step Pass – Smooths curves on small characters.
Option 2:
Initial Down Force - Enables special blade control during initial cutting of
media.
Distance Adjust –Corrects the distance distortion under special circum-
stances.
Test – For details see Test Modes and Troubleshooting.
ORIGIN - Setting the Cutting Origin
This function allows you to move the origin point of cutting.
Use the UP, DOWN, RIGHT or LEFT ARROW keys to move the cutter to the
desired origin position.
• Press the ORIGIN key. The beeper sounds and the LCD displays a message
indicating that the new origin is in effect.
To Next Page
Loading...