Background Settings: Background Settings for HP-GL
123
• Press the F3 key to select ENABLED or press the F4 key to select DISABLED. A
blinking cursor appears beside your choice.
• Press the ENTER key to register your setting and to proceed to the next menu.
Press the NEXT key if you wish to bypass this setting with no changes.
If you used METHOD 1 to select BACKGROUND SETTINGS, press the MENU
key if you do not wish to make any changes. If you used METHOD 2 to select
BACKGROUND SETTINGS, turn off the plotter if you do not wish to make any
changes.
NOTE: This menu only appears when the 2 Pen option is installed.
CHECK PEN
ENABLED.
DISABLED_.
LANGUAGE SELECTION
[ ENGLISH ]
To Next Page
Loading...