Options: FC5100 Media Roll Holder Manual
167
1 Attach the left media roll holder bracket to the left side of the stand assembly
with two (2) M6 x 16mm socket button head cap screws using the 4mm L
wrench hex key tool. Repeat this step with the right media roll holder bracket.
2 Place each of the conveyor rollers into the slots on the media roll holder brack-
ets. Make sure the conveyor rollers are seated all the way into the notches and
are straight.
Left media roll holder
bracket
Right media roll holder
bracket
Conveyor rollers
To Next Page
Loading...