GRASS VALLEY K2 - Unlock K2 Summit Production Clients or K2 solo Media Servers

2. Click the Add button.
The Add Package(s) dialog box opens.
3. Do one of the following to select the software package:
• Select from the list of packages then click OK.
• Click Browse, browse to and select the package, then click Open.
4. If one or more EULAs are displayed, accept them to proceed. If you do not accept
a EULA, the associated software is not assigned to the deployment group.
SiteConfig adds the package to the deployment group.
The package appears in the Managed Packages list for the selected deployment group.
SiteConfig creates new software deployment tasks for the package and displays them
in the Tasks list view.
Unlock K2 Summit Production Clients or K2 Solo Media Servers
This task disables the write filter on one or more K2 Summit Production Clients or
K2 Solo Media Servers.
Prerequisites for this task are as follows:
• The device or all the devices in the group are communicating correctly in
SiteConfig. This is indicated by the green star icon overlay.
• The device or all the devices in the group are currently locked. This is indicated
by the gray lock icon overlay.
1. If you have not already done so, stop all media access on the K2 systems. This
includes record, play, and transfer operations.
2. In either the Network Configuration | Devices tree view or the Software Deployment
| Deployment Groups tree view, identify the device or the group of devices that you
intend to unlock.
3. Right-click the device or the group and select Unlock.
A “…may require restart…” message appears.
4. Click Yes to allow SiteConfig to restart the device or devices.
The Set Administrative Credentials dialog box opens.
5. Enter a username and password with administrator level privileges on the device
or devices and click OK.
The Unlocking Devices window opens and displays progress.
6. When the Unlocking Devices window reports that the unlock process completed
successfully, click Close.
The device or devices are now unlocked. For K2 Summit Production Clients, this also
disables the write filter, which enforces a restart.
52 K2 Version 7.2.7 Release Notes & Upgrade Instructions 12 May 2010
Upgrading K2 systems