For internal-storage, refer to Compatible K2 Summit Production Client and K2
Solo Media Server components on page 11.
•
• For direct-connect storage, refer to Compatible K2 Lx0 RAID components on
page 15.
9. Click OK.
The Progress Report window appears showing the microcode download task
and the percentage completion.
10. If direct-connect storage and upgrading expansion chassis microcode, do the
following:
a) Right-click the controller in the tree view, then select Advanced | Load Disk
Enclosure Microcode in the context menu.
b) In the Open File dialog box, browse to the directory and file as listed in K2 Lx0
RAID compatibility specifications earlier in these release notes.
c) Click OK.
The Progress Report window appears showing the microcode download task
and the percentage completion.
11. When finished, exit Storage Utility.
12. If direct-connect storage, on 100% completion, proceed as follows:
• If the RAID controller chassis has redundant controllers, no power cycle is
required. The microcode download is complete.
• If the RAID controller chassis does not have redundant controllers, power cycle
the RAID controller chassis.
13. Put AppCenter channels back online.
14. Restart.
Related Links
Compatible K2 Lx0 RAID components on page 15
Upgrade disk drive firmware on stand-alone K2 system
Do not do this task if:
• A K2 system with disk drive firmware already at a compatible version, as listed in
compatibility specifications.
Do this task if:
• A K2 system with disk drive firmware that you need to upgrade, as listed in
compatibility specifications.
For internal storage K2 Summit/Solo systems, find compatibility specifications at
Compatible K2 Summit Production Client and K2 Solo Media Server components on
page 11. For a K2 Summit Production Client with direct-connect storage, find
compatibility specifications at Compatible K2 Lx0 RAID components on page 15.
80 K2 Version 7.2.7 Release Notes & Upgrade Instructions 12 May 2010
Upgrading K2 systems
To Next Page
Loading...
