Known Problems
The following limitations are present in this release of software. If you wish to obtain
more information about these limitations, please mention the reference numbers.
AppCenter
When attempting to create a sub-bin eleven levels deep, an
error is displayed.
Description:CR102538
Constrain nested sub-bins to ten levels deep or less.Workaround:
Consolidate media operation fails when the media file system
is nearly full on the K2 Summit Production Client or K2 Solo
Media Server.
Description:CR102785
Maintain free space on the media file system equivalent to the
longest clip consolidated.
Workaround:
Closed captioning and/or ancillary data not present in the last
few seconds of a growing clip's playout. This occurs when
Description:CR105208
playing out a clip that is being recorded, and the recording
stops.
Stop playout of growing clip before stopping recording. In
any case the closed captioning and/or ancillary data is
Workaround:
full-length in the recorded clip and present in subsequent
playout.
When reconfiguring channel security settings on Configuration
Manager Security tab, AppCenter does not allow
username/password fields to be blank.
Description:CR108294
Enter username/password for a valid user account. Once
configured, the fields require valid information.
Workaround:
After a software upgrade, a K2 system configured to PAL is
unable to record or play. This occurs infrequently. Most
systems upgraded do not have this problem.
Description:CR109249
In Configuration Manager configure to PAL and restart.Workaround:
Recorded video is one frame late relative to timecode. This
occurs if you record using Time-of-day timecode and the
source is from channel four's LTC input.
Description:CR109197
Connect the house LTC input to channel 1 and use it as the
Time-of-day source.
Workaround:
AppCenter does not allow a clip to be deleted if the clip is
associated with a playlist, program, or subclip.
Description:CR110369
First use the "Consolidate Media" feature on the clip, then
delete the clip.
Workaround:
102 K2 Version 7.2.7 Release Notes & Upgrade Instructions 12 May 2010
Known Problems
To Next Page
Loading...
