• K2 software must be installed on the K2 Summit Production Client or K2 Solo
Media Server
1. If you have not already done so, log on to the K2 system with Windows
administrator privileges.
2. From the Windows desktop, click Start | All Programs | Grass Valley | Write Filter
Utility.
FBWF Manager opens.
3. Under Filter Settings, set Filter to Disable.
Do not modify other settings.
4. Click OK.
5. When prompted, restart the K2 system.
Enable write filter
Prerequisite:
• K2 software must be installed on the K2 Summit Production Client or K2 Solo
Media Server
1. If you have not already done so, log on to the K2 Summit Production Client or K2
Solo Media Server with Windows administrator privileges.
2. From the Windows desktop, click Start | All Programs | Grass Valley | Write Filter
Utility.
FBWF Manager opens.
3. Under Filter Settings, set Filter to Enable.
4. Under Protected Volumes, set C: to Protected.
Do not modify other settings.
5. Click OK.
6. When prompted, restart the K2 Summit Production Client or K2 Solo Media Server.
Passwords and security on K2 systems
To provide a basic level of security, K2 systems recognize four different security
levels based on Windows users and groups, and the systems ship from the factory with
accounts pre-configured accordingly. To access the system you must login with the
username and password for one of the pre-configured accounts.
The following table shows the different types of K2 users and their privileges.
Passwords are case sensitive. The term “unknown user” applies to any user who logs
in to the K2 System without using the Windows administrator, K2 administrator, or
K2 user login and password
12 May 2010 K2 Version 7.2.7 Release Notes & Upgrade Instructions 97
Additional notes
To Next Page
Loading...
