174 Kayak — User Manual
Section 5 — Kayak Menu Summaries
Coupling Keys
Touching the Modify Cpld Key button calls a sub-menu. In this menu the Key
to be coupled to the selected fill source can be selected (Figure 99).
Figure 99. Config - Coupled Key Menu
1. Select a Fill Source.
2. Press the Modify Cpld Key button.
3. Select a Key Source.
4. Press OK to finish the selection.
The
Reset All button on the previous menu (Figure 98 on page 173) brings up
buttons that can be used to reset all the key couplings to White (full raster
key) or to Default (self key using the same source as the fill).
To Next Page
Loading...
