L-SOLUTION 700 / 800 / 900 machines . 28
First contact
5. Select the language you want ("ENGLISH").
When you receive your L-SOLUTION machine, it is set up to display the messages in English.
To choose the language you want, press as many times as necessary.
To validate your choice press
The following message is displayed on the L.C.D. screen :
L-SOLUTION 800
LANGUAGE ENGLISH
SERIAL PORT
DISPLAY UNIT MM
6. Select the machine menu (L-SOLUTION 800)
The programme used by the L-SOLUTION 800 machine is also used by other GRAVOGRAPH machines.
To choose the machine menu press as many times as necessary.
To validate your choice press
L-SOLUTION 700
L-SOLUTION 800
L-SOLUTION 900
L-SOLUTION 500 XL
7. Select the L-SOLUTION machine you want
To choose the machine you want, press as many times as necessary.
To validate your choice press
L-SOLUTION 800
LANGUAGE ENGLISH
SERIAL PORT
DISPLAY UNIT MM
8. Press
The following message is displayed on the L.C.D. screen :
<READY TO RECEIVE>
001 FILENAME1
PUI 40 VIT 10
DPIX 400 DPIY 400
Installation
To Next Page
Loading...
