First contact
L-SOLUTION 700 / 800 / 900 machines . 75
Engraving menu description
The remainder of this section will describe each one of the sub-menus and their meaning.
PARAMETERS (settings) sub-menu
(diagram 1)
1. Switch on the L-SOLUTION machine (main stop button (L) in I position).
Wait for the following message to appear on the screen:
<READY TO RECEIVE>
001 FILENAME1
PUI 40 VIT 10
DPIX 400 DPIY 400
2. Press the "CANCEL" key
PARAMETERS
FILE
INFO
CONFIGURATION
3. Select the PARAMETERS (settings) sub-menu using the arrows keys
4. Validate
POWER 40
SPEED 10
DPI-X 400
DPI-Y 400
5. Select the setting desired using the arrows keys
6. Validate
7. Key in the new value
8. Validate
9. To exit the PARAMETERS (settings) sub-menu, press
The following message is displayed on the screen:
<READY TO RECEIVE>
001 FILENAME1
PUI 40 VIT 10
DPIX 400 DPIY 400
System operation
To Next Page
Loading...
