L-SOLUTION 700 / 800 / 900 machines . 6
First contact
Overview
Introduction
Thank you for purchasing the L-SOLUTION machine. Years of testing and refinements have made this unit the ultimate
LASER engraving and cutting system.
Thanks to its innovative design with :
- the "F-load" Front loading concept developed to allow for the front loading of the plates and items to engrave,
- the "A-sens" Auto sensor concept, which adjusts the focal length automatically for you according to the surface
to be worked on (even when engraving a hollow item),
- the "D-fit" Depth fitting concept which calculates and adjusts the position of the LASER head automatically when
cutting thick materials in several passes,
- the beam concentration with the "X-beam" eXpanding beam concept designed to produce perfect quality
engraving over the entire surface of the table,
and with its performance results (speed, power and engraving areas), the L-SOLUTION combines flexibility and full featured
performance without sacrificing simplicity, ease of use, or ease of maintenance.
Using advanced engineering and design features, the L-SOLUTION is truly one-of-a-kind.
Actually, the L-SOLUTION is such a breakthrough in technology that it is more than just a LASER system, it is a precision
engraving and cutting device used as a tool for the imagination.
To begin with, we highly recommend that this entire manual be read before attempting to use the LASER system. The
manual includes important information about safety, assembly, use, and maintenance.
Contra-indications
Do not use the controls or settings and do not carry out procedures other than those
specified in the use manual, to avoid risking exposure to dangerous radiation.
The machine must never be handled without an adult present. Keep the machine,
wires and cables out of children's reach.
This machine is only designed for one user. Do not let several people use the machine
simultaneously.
The LASER engraving machine is a high performance machine : All safety instructions
must be complied with.
Exposure to the LASER beam may cause physical burns or severe eye damage. Proper
use and care of this system are essential to safe operation.
This machine is only designed for engraving and cutting purposes of the materials
listed in this user manual and must never be used for other applications.
The LASER machine must be properly installed and connected to an appropriate
discharge system in accordance with the specifications defined in this manual.
Do not use this machine in an explosive environment.
The processing materials must be introduced entirely into the machine.
Never expose yourself to the LASER beam. It could cause severe physical burns and
irreparable eye damage.
Overview
To Next Page
Loading...
