L-SOLUTION 700 / 800 / 900 machines . 62
First contact
Cylinder attachment (optional accessory)
(pict. 1)
This selection must be used only if the optional cylinder attachment has been purchased.
Refer to the instructions provided with this option. Do not attempt to use this until you have read the rest of this manual.
There is important information about the operation of the LASER system that must be read and understood before operating
the cylinder attachment.
The user must indicate the diameter of the engraving cylindrical part (pict. 2).
L-SOLUTION 800 and 900 : max. ø = 7"
7/8
= 200 mm
L-SOLUTION 700 : max. ø = 5"
1/2
= 140 mm
Printer driver
To Next Page
Loading...
