Operating method:
Press ―Mode‖ button to enter into
selection menu of hydro box, press
―▲‖ and ―▼‖ button to switch serial
number of hydro box;
Press ―Mode‖ button to enter into
shunt valve selection menu, press
―▲‖ and ―▼‖ to switch serial number
of shunt valve;
Press ―Mode‖ button to enter into
selection menu of indoor unit, the
engineering number in timer area
flickers, press ―▲‖ and ―▼‖ to adjust
engineering number; press and hold
the button within 5 seconds, the unit
digit of engineering number will
increase/decrease; press and hold
the button for 5~10 seconds, the
tens digit of engineering number will
increase/decrease. Press
―Enter/Cancel‖ button can return to
the upper level status.
Display mode:
Temperature area: displays serial