GMV5 Home DC Inverter Multi VRF Units
367
Icon indicates that there is problem found during debugging. Debugging will not be
completed unless problem is solved (after problem is solved, step without ―OK‖ button will switch
to the next step automatically, otherwise user needs to click ―OK‖ to continue). Click icon and
relevant information detected in this step will be displayed for your reference in order to solve
problems. Click ―Close‖ to close the pop-up.
During debugging, a click on ―Break‖ can stop debugging. Click ―Start‖ to resume debugging
and then debugging will be finished step by step. For No.10 ODU Valves Check Before Startup,
there are ―Back‖ and ―Skip‖ buttons. If there is error in this step, you can go back to step No.9 and
To Next Page
Loading...