Gree GMV-S280W/A-X

GMV5 Home DC Inverter Multi VRF Units
83
of ambient
temperature
sensor of indoor
unit(for cooling,
drying and fan
mode)
sensor of unit:
0℃;
Temperature
sensor of wired
controller: 0℃
decrease by 1℃.
P22
Corrected value
of ambient
temperature
sensor of indoor
unit (for heating,
fast heating and
warming mode)
-15～+15
Temperature
sensor of unit:
-2℃;
Temperature
sensor of wired
controller: 0℃
Press ― ‖ or ― ‖ to increase or
decrease by 1℃.
Temperature sensor of the unit
and the temperature sensor of
wired controller share the same
corrected value.
In heating mode, corrected value
of temperature sensor of unit =
corrected value of temperature
sensor of wired controller -2℃.
P32
Capacity
adjustment
function of
indoor unit
-40%～+40%
00
Press ― ‖ or ― ‖ to increase or
decrease by 10%.
P35
Factory setting
recovery for
user functions
00: Invalid
01: Valid
00
Select "01" and then press and
hold "SWING/ENTER" button to
restore the factory settings for
user functions (Factory setting
recovery will fail if remote shield is
effective).
P36
Factory setting
recovery for
engineering
settings
00: Invalid
01: Valid
00
Select "01" and then press and
hold "SWING/ENTER" button to
restore the factory settings for
engineering settings (Factory
setting recovery will fail if remote
shield is effective).
P40
Prevention for
heat collection
00: Disabled
10: 10 seconds
20: 20 seconds
30: 30 seconds
40: 40 seconds
50: 50 seconds
60: 60 seconds
00
It indicates the number of seconds
for enabling the low-level fan
every 15 minutes.
P42
Setting of indoor
unit project
number
1~255
Automatically
generated upon
the initial system
operation
In "P42" status, press "MODE"
button to enter the setting menu.
The project number blinks in the
timer zone. Press ― ‖ or ― ‖ to
adjust the project number. Press
"SWING/ENTER" button to
confirm the setting and return to