Model 672/675 Technical Reference Manual
3-3
Style 1
This style uses the classic GSE 2x5 display in large font. Press the [SELECT] key to toggle through the
different parameter choices.
Style 2
This style incorporates the classic GSE 2x5 display and a second display, which will show two other
parameters. Press the [SELECT] key to toggle through the different parameter choices.
Style 3
This style incorporates the classic GSE 2x5 display style along with three smaller displays, which will show
the gross, tare and net parameters. Press the " key to toggle through the different parameter choices.
APPLICATION MENU ()
The application menu provides access to other built in applications. Loading the application menu will erase
the current application.
From the application menu explanation screen press [ENTER] to load the application menu or press [CLR]
exit back to the BASIC WEIGH mode.
If [ENTER] was pressed in the previous step the display will show ARE YOU SURE ???. Press [ENTER] to
proceed or press [CLR] to exit back to the BASIC WEIGH mode.
If [ENTER] was pressed in the previous step the display will show “ENTER ACCESS CODE”. Key in the
access code (default code is 23640) and press [ENTER] or press [CLR] to exit back to the BASIC WEIGH
mode.
Refer to Figure 3-1 for the application menu screen.
Note: Enable the APW LOOKUP from the GSE CUSTOM tab. Press [F2].
CALIBRATION
Refer to Chapter 5: Calibration for complete instructions on calibrating the Model 672.
Medium display Small display Small display
Gross Net Tare
Net Net Tare
Tare Net Tare
Quantity Total Net Tare
Part # Net Tare
Quantity Net Tare
Average Piece Weight (APW) Net Tare
Medium Display Small Display Small Display Small display
Gross Gross Tare Net
Net Gross Tare Net
Tare Gross Tare Net
Quantity Total Gross Tare Net
Part # Gross Tare Net
Quantity Gross Tare Net
APW (average piece weight) Gross Tare Net
To Next Page
