C-xiv GTECH Technical Training and Support Services
Table C-9. Assembly-Lower Mechanism
Number Description
GTECH Part
Number
1 ARM - ROTARY (Part # 28-09780) 16-2063-01E
2 ASSY - KNIFE MOTOR (Part # 28-00760) 20-1248-01
3 ASSY - PCB ACCUTHERM ULTRA (28-09185L) 24-1788-01E
4 ASSY - PAPER PATH (Part # 28-09735) 15-3746-01E
5 ASSY - PRINT HEAD (Part # 28-09677) 24-1789-01E
6 BEARING - COMPENSATION (VALIDATION)
(Part # 25-07499)
16-2066-01E
7 BEARING - KNIFE (ROTATIVE) (Part # 25-09784) 12-1026-01E
8 BUSHING SLACKER (Part # 28-09669) 13-1028-01E
9 CABLE - FLAT FLEXIBLE (Part # 28-04036) 32-1406-01
10 GEAR-COMBO 48/28 IDLER (Part # 28-03705) 16-1814-01
11 COVER - GEAR (Part # 28-09674) 16-2067-01E
12 FRAME ASSY (MECHANISM) (Part # 28-09689) 15-3747-01E
13 GEAR - 24 TOOTH (Part # 28-03703) 16-1815-01
14 GEAR - 36/18 TOOTH (Part # 28-03780) 16-1808-01
15 GEAR 45/24 TOOTH (Part # 28-03782) 16-1807-01
16 GEAR - COMBO 26/46 DRIVE (Part # 28-03707) 16-1813-01
17 GUIDE - SLACKER (Part # 28-09685) 16-2068-01E
18 BLADE-KNIFE ROTATIVE (Part # 28-09776) 15-3748-01E
19 ASSY-FEED MOTOR M280 ULTRA (Part # 28-09683) 24-1790-01E
20 NUT - M3 HEX W/LOCKWASHER (Part # 98-0621) 10-1368-01
21 PIN-KNIFE ARM (Part # 28-09786) 16-2069-01E
22 GROUND PRINT HEAD (RIGHT) (Part # 28-09711) 11-4268-01E
23 GROUND PRINT HEAD (LEFT) (Part # 28-09712) 11-4269-01E
24 RETAINER-E RING.25 DIA. 10-2146-01E
25 RETAINER-E RING .125 DIA. 10-2147-01E
To Next Page
Loading...