Gtech Accutherm - Page 8

TOC-ii GTECH Technical Training and Support Services
Chapter 3
Configuration
Chapter 4
Operation
Chapter 5
Diagnostics
Printer Self Test..........................................................5-2
Self-Test Mode.........................................................5-3
Normal Operation Errors .........................................5-4
Extended Diagnostics.................................................5-6
Chapter 6
Download
AccuTherm® Ultra Firmware Install Procedure........6-2
Chapter 7
Disassembly
Warranty Information.................................................7-1
Required Tools...........................................................7-2
Disconnect the Power Cable ......................................7-2
Disconnect the USB Communications Cable.............7-3
Remove the Cover Assembly.....................................7-4
Remove the Power Supply from the Base
Assembly...................................................................7-7
Remove the Printer Mechanism Assembly from
the Base Assembly....................................................7-8
Remove the Main Controller PCB Assembly
from the Printer Mechanism Assembly ....................7-9