GW Instek ASR-2000 Series - Page 18

ASR-2000 Programming Manual
18
Item
Description
Line Input
AC inlet
Output
Terminal
Output voltage terminal (M3 screw
type, 10 ~ 18 AWG)
Remote
Sensing
Input
Terminal
Compensation of load wire voltage
drop. Only +S and –S are available for
compensation. N.C. terminals are
N/A. Refer to User Manual for details.
Exhaust
Fan
The exhaust fan is used to expel the
heat from the unit. Please ensure
there is at least 20 cm distance
between any object and the fan.
External
Control I/O
Connector
Used to control ASR-2000 externally by
using the logic signal and monitor
Sequence function status
External
Signal
Input
Connector
Synchronizing the output frequency
with this external input signal for
SYNC or outputting the amplified
external signal with this external input
signal for EXT and ADD.