GW Instek ASR-2000 Series - Preset Settings; Save Preset Settings to Local Memory

OPERATION
103
Preset Settings
Save Preset Settings to Local Memory
Up to 10 preset settings can be saved to internal memory.
Steps
1. Press Preset followed by
clicking with holding on
the F1 ~ F4 soft-keys
individually to save the
present settings to the
corresponding memory
number.
+
(hold)
Presets
M0 ~ M3
2. Press the Preset key again to exit from the preset
mode.
Example
For example, pressing Preset & holding F1 will
save the present settings to memory slot 0
(saved to M0).
Note
 There are overall 10 groups of memory number
for preset setting (M0 ~ M9). Only M0 ~ M3 are
available in soft-keys, whereas the rest groups
M4 ~ M9 can be saved in the Save/Recall Files
utility under Menu system. Refer to page 105
for more details.
 The preset key will be lit green when active. A
beep will be heard (Buzzer is set to ON) and a
message will displayed when the settings are
saved.