GW Instek ASR-2000 Series - Reset to Factory Default Settings

ASR-2000 Series User Manual
46
Reset to Factory Default Settings
Background
The default settings can be restored from the Menu
key settings. See page 195 for the default factory
settings.
Steps
1. Press the Menu key. The Menu
settings will appear on the display.
2. Use the scroll wheel to go to item 8, Default
Setting.
3. Press Enter for 2 times to restore the unit back
to the default settings.
Default settings
Note
Default Setting will Not restore back to default
settings for Preset/SEQ/SIM/ARB modes.