GW Instek ASR-2000 Series - Save a Simulation to Local Memory; Recall a Simulation from Local Memory

ASR-2000 Series User Manual
166
Save a Simulation to Local Memory
Saving a
Simulation
Simulation settings can be saved to one of 10
memory slots (SIM0 ~ SIM9).
Steps
1. Press Save[F3] key firstly.
2. A list of memory slots prompts where it is
available to use scroll wheel followed by
pressing Enter to execute save action.
3. A prompt message will appear when the save
action is successful.
Save
SIM0 ~ SIM9
Recall a Simulation from Local Memory
Recall a
Simulation
Simulation settings can be recalled from one of 10
memory slots (SIM0 ~ SIM9).
Steps
1. Press Recall[F2] key firstly.
2. A list of memory slots prompts where it is
available to use scroll wheel followed by
pressing Enter to execute recall action.
3. A message will appear when the settings are
recalled successfully.
Recall
SIM0 ~ SIM9