GW Instek ASR-2000 Series - Save a Sequence to Local Memory; Recall a Sequence from Local Memory

ASR-2000 Series User Manual
152
Save a Sequence to Local Memory
Saving a
Sequence
Sequence settings can be saved to one of 10
memory slots (SEQ0 ~ SEQ9).
Steps
1. Press Save[F3] key firstly.
2. A list of memory slots prompts where it is
available to use scroll wheel followed by
pressing Enter to execute save action.
3. A prompt message will appear when the save
action is successful.
Save
SEQ0 ~ SEQ9
Recall a Sequence from Local Memory
Recall a Sequence
Sequence settings can be recalled from one of 10
memory slots (SEQ0 ~ SEQ9).
Steps
1. Press Recall[F2] key firstly.
2. A list of memory slots prompts where it is
available to use scroll wheel followed by
pressing Enter to execute recall action.
3. A message will appear when the settings are
recalled successfully.
Recall
SEQ0 ~ SEQ9