GW Instek ASR-2000 Series - Page 154

ASR-2000 Series User Manual
154
Delete
Deletes (Recall Default) the
selected sequence memory
from local memory.
5. Go to the Memory No. setting and select the
sequence memory number to perform the
operation on. Press Enter to confirm.
Memory No.
0 ~ 9 (SEQ0 ~ SEQ9)
Execute File
Operation
6. Press EXE[F1] key to perform the
file operation.
Exit
7. Press EXIT[F4] key to exit from the
Save/Recall Files settings.
Example
Memory No. 0 selected
Load file from USB
to Local memory
All Data
Operation
8. Go back to the Type setting using the scroll
wheel and press Enter. Select All Data and press
Enter to confirm.
9. Go to the Action setting and choose the file
operation and then press Enter .
MEMUSB
Saves all the files including
Preset, Sequence, Simulate and
ARB from the local memory to
a USB flash drive.