GW Instek ASR-2000 Series - Page 190

ASR-2000 Series User Manual
190
9
10
11. Click the Configuration Icon. Under the IO
Settings tab check Enable Termination Character.
The termination character should be set as Line
Feed -\n.
11
12. Click the Input/Output icon. Under the Basic I/O
tab, make sure *IDN?\n is entered in the Select
or Enter Command drop box.
13. Click Query.
The ASR-2000 will return the machine
identification string into the buffer area:
GW-INSTEK, ASR-2XXX, GXXXXXXXX, XX.XX