GW Instek ASR-2000 Series - Page 204

ASR-2000 Series User Manual
204
Valid Only Time Slew
Rate Mode
Remote Sense Setting Limit
Message
Display Message
Only
USB File Write Error!
Can Not Save File to USB
Display Message
Only
Invalid in This Output
Mode
This mode not support SEQ or
SIM
Valid Only AC+DC-INT, AC-INT
and DC-INT Mode for SEQ
Valid Only AC+DC-INT Mode for
SIM
Display Message
Only
Invalid For Auto Range
Auto range does Not allow
SEQ/SIM, change the output
range
Display Message
Only
Invalid with Output
OFF, Turn ON the
Output First
The output off state does Not
allow the execution. Turn on the
output first
Display Message
Only
Invalid with Output ON,
Turn OFF the Output
First
The output on state does Not
allow the execution. Turn off the
output first
Display Message
Only
Invalid in This Sequence
Invalid Operation In This
Sequence
Display Message
Only
SEQ# Deleted
SEQ0~SEQ9 Deleted
Display Message
Only
SIM# Deleted
SIM0~SIM9 Deleted
Display Message
Only
Cleared SEQ#
Cleared SEQ0~SEQ9
Display Message
Only
Cleared SIM#
Cleared SIM0~SIM9
Display Message
Only
Recalled from SEQ#
%s is File Name , ex SEQ0~SEQ9
or SIM0~SIM9
Display Message
Only
Recalled from SIM#
Recalled from SIM0 ~ SIM9
Display Message
Only
Recall Fail!
SEQ0 ~ SEQ9 or SIM0 ~ SIM9
Recall Fail!
Display Message
Only
Saved to SEQ#
Saved to SEQ0 ~ SEQ9
Display Message
Only
Saved to SIM#
Saved to SIM0 ~ SIM9
Display Message
Only
Save Fail!
SEQ0 ~ SEQ9 or SIM0 ~ SIM9
save Fail!
Display Message
Only