GW Instek ASR-2000 Series User Manual

OPERATION
57
To minimize noise pickup or radiation, the load
wires and remote sense wires should be twisted-
pairs of the shortest possible length. Shielding of
the sense leads may be necessary in high noise
environments. Where shielding is used, connect the
shield to the chassis via the rear panel ground
screw. Even if noise is not a concern, the load and
remote sense wires should be twisted-pairs to
reduce coupling, which might impact the stability
of the power supply. The sense leads should be
separated from the power leads.

GW Instek ASR-2000 Series Specifications

General

Brand	GW Instek
Model	ASR-2000 Series
Category	Portable Generator
Language	English