GW Instek ASR-2000 Series - Page 73

OPERATION
73
Setting the Output AC/DC Voltage & Gain
Background
The ACV, DCV and Gain settings set the output
voltage level. Before setting the power supply
voltage level, set the voltage range and voltage limit
beforehand.
Steps
1. Press the V key. The ACV
parameter will be selectable.
Also, it is available to use the scroll
wheel followed by the Enter key to
make the ACV parameter
selectable as well.
DCV
When it is under AC+DC-INT, AC+DC-ADD or
AC+DC-Sync mode.
Further use the scroll wheel to navigate to the
DCV parameter and press Enter to make DCV
parameter selectable.
When it is under DC-INT mode.
Directly press the V key or use the scroll wheel
to navigate to the DCV parameter and press
Enter to make DCV parameter selectable.
GAIN
When it is under AC+DC-EXT, AC-EXT or AC-
VCA mode.
Directly press the V key or use the scroll wheel
to navigate to the GAIN parameter and press
Enter to make GAIN parameter selectable.
When it is under AC-ADD mode.
Further use the scroll wheel to navigate to the
GAIN parameter and press Enter to make GAIN
parameter selectable.