GW Instek GPP-1326 - Page 152

GPP Series User Manual
152
Command
:SEQUence[1|2]:TEMPlet:INVErt?
Function
Queries whether the invert function under the
active selected templet is enabled.
Example
:SEQUence2:TEMPlet:INVErt?
Returns to the templet of CH2 to check if the invert
function is ON or OFF.
Command
:SEQUence[1|2]:TEMPlet:MAXValue{<value>|MI
Nimum|MAXimum}
Function
Sets the maximum voltage or current value of the
active selected templet.
Description
When voltage is the object to edit, it is the
maximum voltage to be set. When current is the
object to edit, it is the maximum current to be set.
When templet type is Pulse, the command is to set
high level value.
Example
:SEQUence2:TEMPlet:MAXValue 5
Sets the CH2 maximum voltage of the active
selected templet as 5V
Command
:SEQUence[1|2]:TEMPlet:MAXValue?
Function
Queries the maximum voltage or current value of
the active selected templet.
Example
:SEQUence2:TEMPlet:MAXValue?
Queries the CH2 maximum voltage or current
value of the active selected templet.
Command
:SEQUence[1|2]:TEMPlet:MINValue{<value>|MI
Nimum|MAXimum}
Function
Sets the minimum voltage or current value of the
active selected templet.