GPT-9000/9000A Series User Manual
18
Used to start editing
MANU/AUTO tests as well as
save settings and parameters.
The MANU/AUTO key is used to
select manual tests (MANU) or
automatic tests (AUTO).
The REMOTE terminal is used to
connect to a remote controller.
The STOP button is used to
stop/cancel tests. The STOP
button will also put the safety
tester in the READY status to
begin testing.
The START button is used to start
tests.
The START button can be used to
start tests when the tester is in the
READY status. Pressing the
START button will put the tester
in the TEST status.
Turns the power on. The safety
tester will always start up with the
last test setting from when the
instrument was last powered
down.
w ww . . co m
information@itm.com1.800.561.8187
All manuals and user guides at all-guides.com
To Next Page
Loading...
Need help?
General
