GW Instek GPT-9000 series - Manu:initial; Manu:name; Manu:step

REMOTE CONTROL
131
MANU:STEP
Set
Query
Description
Sets the MANU test number.
Syntax
Query Syntax
MANU:STEP <NR1>
MANU:STEP?
Parameter/
Return parameter
<NR1>
0~100.
Example
MANU:STEP 100
Sets the manual test number to 100.
MANU:NAME
Set
Query
Description
Sets or returns the test name for the selected
manual test. The test must be in MANU mode
before this command can be used.
Note only alphanumeric characters (A-Z, a-z, 0-9)
and the “_” underscore character can be used to set
the MANU test name.
Syntax
Query Syntax
MANU:NAME <string>
MANU:NAME?
Parameter/
Return parameter
<string>
10 character string. (first character must
be a letter)
Example
MANU:NAME test1
Sets the manual test name to “test1”.
MANU:INITial
Set
Query
Description
Loads the initial (default) settings for the selected
MANU test number. The initial settings that are
loaded depend on the test function (ACW, DCW,
IR or GB).
Syntax
MANU:INITial
w ww . . co m
information@itm.com1.800.561.8187
All manuals and user guides at all-guides.com
all-guides.com