GW Instek LCR-8000G Series - Speed; Step Setting; Speed;Step Select Measurement Speed (Capture Timing)

LCR-8000G Series User Manual
102
Speed / Step Setting
Select measurement speed (capture timing)
Background
The speed is the same setting used in the basic
measurement (page57), except in the graph mode,
maximum speed setting is not available.
Panel operation
1. Press the Up/Down key and move
the cursor to Speed.
Speed: Fast
2. If necessary, press the Left/Right
key to change the setting (time per
capture).
DC
AC≤
100Hz
AC≤
2kHz
AC>
2kHz
AC≥
1MHz
Slow
900ms
1.3s
600ms
600ms
620ms
Med
120ms
1.2s
470ms
450ms
470ms
Fast
60ms
650ms
180ms
150ms
150ms
w ww . . co m
information@itm.com1.800.561.8187