GW Instek LCR-8000G Series - Run in Delta Mode

PASS-FAIL MODE
69
Hi and Lo values are automatically swapped if
necessary
Hi and Lo Swapped
4. The display updates the Hi/Lo result
immediately. The result is pass if the bar stays
in the central area. The buzzer sounds
accordingly.
Result > Hi
HI
Result < Lo
LO
Lo < Result < Hi
(Pass)
PASS
Run in Delta mode
1. Press F5 to select Delta
measurement.
F 5
AbsAbs %
2. Use the Left/Right key to move the
cursor to Hi/Lo value or nominal
value for editing.
53.388mF
Hi
Lo
1.0000 mF
1.0000 mF
3. Use the numerical keys
and unit keys to enter the
value. The editing value
appears at the bottom left
corner of the display.
Range
Speed Med
Auto
Lo Lim: 1.5_
1.5mF
Enter
F
m
w ww . . co m
information@itm.com1.800.561.8187