PASS-FAIL MODE
65
Set parameters
For more detailed descriptions, see Basic measurement, page48.
When the entered value does not fit in the
range, the nearest available value is selected.
When the wrong unit (such as Ω) is entered,
the value is cancelled.
Measurement
range (to Auto)
Press the Left/Right key repeatedly to
move the cursor to Range position, and
use the Up/Down key to select Auto (if
necessary).
Press the Sing/Rep key repeatedly to
select Single (manual trigger). To trigger
measurement, press the Trigger key.
Press the Sing/Rep key repeatedly to
select Rep (automatic trigger). Press the
Left/Right key repeatedly to move the
cursor to Speed, and use the Up/Down
key to select the update rate.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
