GW Instek LCR-8000G Series - Adjust Vertical Scale

LCR-8000G Series User Manual
106
Adjust vertical scale
Background
When the measured data does not fit into the
original vertical scale, use this function so that the
LCR-8000G automatically adjusts the scale to
include the whole plotted data.
Panel operation
1. If part or all of the plotted data are
out of the vertical range, use the
automatic fit function. Press F1
(Function), then F2 (Fit).
F 1
F 2
(Partially out of range)
CAPACITANCE VS FREQUENCY
FUNCTION
RETURN
20.0 40.0 60.0 80.0 100
(Hz)
300.0n
250.0n
(F)
MKR: 32.000 Hz
Cs : 25.000nF
LEVEL: 10.0mV
SPEED:FAST
(Totally out of range)
CAPACITANCE VS FREQUENCY
FUNCTION
RETURN
20.0 40.0 60.0 80.0 100
(Hz)
300.0n
250.0n
(F)
MKR: 32.000 Hz
Cs : 25.000nF
LEVEL: 10.0mV
SPEED:FAST
2. The vertical range is automatically adjusted to
include the whole plotted data.
CAPACITANCE VS FREQUENCY
FUNCTION
RETURN
20.0 40.0 60.0 80.0 100
(Hz)
400.0n
100.0n
(F)
MKR: 60.000 Hz
Cs : 60.000nF
LEVEL: 10.0mV
SPEED:FAST
w ww . . co m
information@itm.com1.800.561.8187